News and Helpful Videos

Pilot Operated Check Valve

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic PartsToday we will discuss;   Pilot Operated Check Valve A pilot operate check valve lets it flow free from its inlet port to it outlet port. Fluid flow that is trying to pass thru the valve from outlet to inlet port will have to be made to make the poppet on its seat. The flow thru the valve is blocked. When it has had enough pilot pressure sensed at the plunger piston, it moves the plunger and unseats the check valve...

Read more →

Hydraulic Regenerative Circuit – Cylinder Extending

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic PartsToday we will discuss: Hydraulic Regenerative Circuit – Cylinder Extending The regenerative circuit has a pump, relief valve, a directional valve that has a blocked port and a 2:1 cylinder. In addition to, the directional valve in the position, both sides of the cylinder piston have the same amount of pressure. Being unstable causes the rod to extend. Fluid discharges from the rod end is added to the pump’s flow. And in a 2:1  cylinder the discharge fluid from the rod...

Read more →

Hydraulic Regenerative Circuit – Cylinder Retracting

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic PartsToday we will discuss: Hydraulic Regenerative Circuit – Cylinder Retracting In order to retract the cylinder rod, the directional valve is shifted. The cap end of the cylinder is drained to tank. All the pump flow and pressure is guided to the rod end side. And while the pump is filling the with the same amount as at the cap end side, the rod retracts at the same speed.   This is just another look at the regenerative circuit. If you...

Read more →

Hydraulic Spring Loaded Accumulator

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic PartsToday we will discuss:   Hydraulic Spring Loaded Accumulator A spring loaded accumulator has a cylinder body, movable piston and a spring. The springs draws a force to the piston, producing into a liquid pressure. As the fluid is pumped into as spring loaded accumulator, the pressure in the accumulator is made up of the compression rate of the spring. Some of the accumulators of they kind, spring pressure can be wide spread by the means of a screw adjustment. Spring...

Read more →

Removing a Bearing

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic PartsToday we will discuss:   Removing a Bearing It is a reversal of installing a bearing, basically. Whatever tools you used to install the bearing, they will be needed to remove it. If the bearing want come off the shaft with ease, you may have to come up with a different way of taking it off. You can take a torch and heat up the bearing, which makes it expand. So you can get in there between the shaft and the...

Read more →